Mirra 2 Chair

The slots in the back are the right size to hook your back pocket buttons and rip them off. I have no work pants with buttons any more.
Aside from that, the unpadded back is horribly uncomfortable. Add to that the strange seat shortener that makes the front edge of the chair poke into your legs uncomfortably, and the armrest filling that is seperated fom the armrest shell, making the armrests feel like strange childrens toys that shift and move about under your arm.
The top of the back is unsupported plastic so that it turns white and breaks eventually. Either that, or the back will snap off where it connects to the back support.
There are 50 or so at the place I work, so don't think this is an isolated case.

I have always been skeptical about these chairs - they look unpadded and rather bare-bones. However, about two years ago I started working in an office where Mirra chairs were used and they are quite frankly amazing. I am an achondroplastic dwarf, meaning it is hard to find chairs that fit me perfectly, and almost all chairs leave me aching after a little while without constant shifting. This is the first office chair that hasn't done that, and it has 100% sold me on Mirra chairs for my future needs.

This chair is very well built. I was tired of buying $200.00 chairs that break in 2 years or less. In the long run, buying quality pays off in many cases and this is one of them. I would have given this chair a 5 star but the arm rest are low in my opinion and I did not want to pay for options when already spending $700.00. At any rate, I highly recommend Herman Miller chairs because of their solid build quality !

Great chair. Better back support than the aeron. No pushing forwards of the shoulders that the embody does. However, the outer perimeter of the chair is felt when sitting, so your leg muscles might not receive equal distribution of your weight across the inner vs outer portions of your hamstring. Design flaw i think, as the embody and other foam based chairs dont have this flaw. Still the best herman Miller chair though in my opinion except for maybe the eames soft pad chair, tho the arm rests suck on that one. Not disappointing by significant means, but has room for improvement in the seat border for weight distribution

I am 6' 3" tall and medium frame body size. I was looking for a seat with enough height and seat depth to support my hamstrings and keep pressure off of my joints. I ordered a fully loaded Mirra 2 hair and to my surprise found out that the chair looked smaller when I pulled it out of the box. The materials and craftsmanship is excellent however my hamstrings were sore after sitting on the chair for few hours. Back support is excellent and the chair was fully loaded, with every possible setting. On calling the customer service, I was told that the seat depth is 16" unlike 25" mentioned on the website. They have not corrected the dimensions -- as I write this review. I returned it with no hassles, free shipping both ways. Customer service was excellent...

I've been using an office chair for almost 50 years and have purchased many over that time. Some were expensive and some, not-so-much. I've also had back issues for many of those years. I've seen the Mirra 2 chair many times but thought the price was a bit too much. Finally I decided to bite the bullet and purchase one. I'm not sorry at all. It is the most comfortable and supportive chair I've ever owned. It's like sitting on a cloud. With all the possible adjustments available there is no excuse for not having a chair that is perfectly adjusted to you. I can sit at my desk for hours with no pain at all. Don't hesitate! Go out and buy a Mirra 2!

When i'm seated, I'm fully tilted back probably 75% of the time. The perforated backs of these chairs are not strong enough to support this seated position for an extended period of time. After less than 2 years, many of the perforations have cracked and ripped. It's only a matter of time before the back will be completely useless. my Mirra 1 suffered the same fate. I was hoping the Mirra 2 would be more durable. Great chair otherwise, but if you're a lean-back sitter, you should think twice.

I love this chair!

I am so glad I splurged on this chair. It is beautiful, functional and well made. My visits to the chiropractor are lessening. I am a 5'11" female and find my chair very comfortable. I added all features except the movable arms and the tilt control. If I did it over, I would do the tilt control. The chair leans forward naturally for good posture, and this took some getting used to. I spent a few days adjusting the tightness of the recline until I got comfortable. All parts work very well and are clearly well made. The teal is beautiful and the butterfly suspension fabric is extremely comfortable.

I was looking for a chair that was less obtrusive than the standard Aeron chair and the Mirra is perfect. It is sturdy and comfortable; just what I was looking for.

I was able to visit the Herman Miller store in NYC and try out the chair and knew how comfortable it was, but was unsure of the color scheme. I decided to play it safe, with the all black, and so glad I did. It fits perfectly in my music studio! Both in design, color, function, I can sit for hours, crafting music, and quite happy. So happy with my purchase.

The chair is very well built and can last for years. It has several parts that are adjustable to your body type and that's good. One thing I learned is it can't go any lower than the preset and my computer station is a little low so it's a bit of a problem. Otherwise, it's very sturdy. A little pricey but may be worth it in the long run.

There is color variation with the product and the seat portion is not comfortable.

When I emailed Herman Miller to inquire about the color variation I received an abrupt and unhelpful response.

I would not recommend this product.

Use this chair at home and at the office. Offers all adjustments necessary to maximize comfort. Easily modified to accommodate keyboard work, writing, or online presentations.

Although I didn't get all the bells and whistles, I did get the lumbar support and its fabulous. The teal color is beautiful and I Love how lightweight and movable this chair is. the only con I would say is the edge on the seat is a hard rubbery material and depending how i sit in it, it can annoy my leg. This would probably be different if I had gotten an adjustable seat. All and all I am so glad I purchased this chair.

I must have tried over 20 chairs in different retail stores and left only disappointed. I decided to look for one via internet and it was the best decision I made. I absolutely love my chair and can I say it is light and so comfortable that I loose track of time and how long I have sat on it. Best buy ever!!

Very nice chair, but had to return first order that did not have the adjustable seat. Unless you are very short, it is critical to order the tilt seat or you will feel a hard line against your upper thighs. Great service--they made exchanging the chair for the proper one very easy. Chair is beautiful to look at too!

I got rid of a Chinese made leather office chair (not Herman Miller) that had gotten uncomfortable (after 2-3 years) and was starting to cause serious lower back pain...I'm only 38 and in good shape, I shouldn't have back pain like that!

I believe in buying American made whenever possible so I decided to get this chair. Yes, these chairs are expensive but it was worth every penny. My back pain was gone immediately after I switched to this chair. I can sit in it for a full work day/week and not even think about it. I wouldn't buy anything else again.

I haven't had it long enough to say how it will hold up but initial impression is it's very well made and will last for a long time. My experience with USA made products is they last several times longer than the cheap imported stuff (like my last chair) and there's a lot of value in the longevity.

Everything about my Mirra 2 chair says high quality, and I love the features/adjustability of the chair (I bought mine with most of the options). For someone with back/neck issues, I have found the chair to be quite comfortable - I have had the chair for the past month or so, using it daily at work. My only issue: would love to see an optional headrest.

I am a jewelry artist and sit most of the time in my studio. When my office supply store chair broke I decided to finally invest in a Herman Miller Mirra 2 chair. I am 100% pleased after using the chair up to 10 hours a day. This chair is so comfortable...no comparison to any chair I have had before. It does not trigger my lower back pain.

I selected the upgrade for the casters because I move around between two back-to-back work benches and a supply cabinet that is just out of reach. This option is fabulous. The chair glides beautifully and is amazingly quiet on the hard floor. I would highly recommend this option.

I adjust the seat height frequently depending on which bench and tools I am using. Adjustment is easy.

Lumbar support and extended seat adjustments work well...I am so glad I opted for both these features.

I am move frequently while seated to reach for different items around my work area and the back of the chair gives me great support and flexibility at the same time.

I recommend this chair for anyone who needs to sit for long periods while working.

I own a media company. I edit video and photography during the day. This is my first Herman Miller chair. I upgraded to have all the bells and whistles. I loved the look and feel right out of the box. The adjustments on the chair are mostly great, everything works as expected, and there is some clever engineering to get just about the perfect fit. I wish I could get a little more out of the lumbar support, maybe another inch. And I wish there was a way to lock or tighten the arm rests (from pivoting inward/outward). It's not a big problem but I tend to rotate the chair as I sit down and often the arm rests pivot out of place. I'm really impressed with how quiet and sturdy the chair is. The only comfort issue I'm having is on the occasional really long days (8-12 hours) the outsides of my legs feel fatigued. I'm getting up every hour to move around on days like this, but still gets uncomfortable toward the end of the day. I'm a skier and cyclist and admittedly have large thighs. Maybe wide hips for a guy I don't know. My butt and thighs rest against the seems of the soft mesh seat material and the plastic and rubber outside edges of the seat. Maybe it's just a little too narrow of a seat for my build. As a reference I'm 6'0" 195lb.

Side note, but worth mentioning: The color I received first wasn't quite as expected and clashed with my office colors. I called HermanMiller and they were very nice and offered to switch it out for another option. I had the next one in a couple weeks and it looks great. Thanks!

I ordered a Mirra 2 chair and received it within 4-5 weeks. I like the ergonomic design, good back support, and the variety in color options. Overall I am happy with the purchase except one thing. The seat depth. Recommendation: go for the adjustable option...When I was placing my order, they offered the option for adjustable depth for an additional cost. I decided to pass on that option, since I would be the only one using the chair and didn't see a need for adjusting the seat-depth. The problem is that what they call "standard depth" is not comfortable if you are taller than 5 ft 10. The standard seat feels too short and not comfortable on the back of my knees at all. Other than that, everything else is great with the chair.

I sat in the original Mirra for over 6 years everyday.

It was my favorite chair because unlike the Areon or others, it's nearly impossible to adjust the Mirra to be uncomfortable. This is perfect for a shared office environment. No more "who messed up my chair?" If you wanted to adjust something you can just turn the big knob and you're good to go.

At home, it's also excellent. Very comfortable for long periods of time. The innovative back and comfortable mesh seat are really great.

The Mirra 2 takes this to the next level. The added cushion on the back makes it even more comfortable. I really like this chair.

I broke my original Mirra a few issues (several years apart). It was so great they sent someone to my home to repair it for free multiple times. The 12 year warranty is also really valuable and definitely helps justify the price for such a premium chair.

I had my last Herman Miller chair (don't remember the model) for 16 years. I sat in a Mirra 2 and fell in love. It's a perfect chair. Period.

I would recommend this chair to anyone who has to spend a lot of time working at a desk. The chair is made well, supportive, and looks good. Really, great chair!!!

Extremely comfortable and love the ability to customize the level of adjustments for arms, height, tilt and especially lumbar support. First chair lasted 16 years. Just bought a second and it is just as comfortable as the original.

I'm very pleased with the chair. Arrived assembled in a big box. All features present and accounted for.

One point of note: When I bought the chair I assumed that the tilt adjustment option would be a continuous, static adjustment like the one on my Steelcase chair at work. On the Mirra, you trigger the release to drop the front of the chair a preset amount. When you lean back, the chair resets to the "un-tilted" configuration.

I have wanted a Herman Miller chair for a long time. I have been completely satisfied with it. It feels like I am floating on a cloud.

This is the BEST chair I've ever used. I had severe back pain every night prior using this chair. The only problem with it is that once you become used to it, every other chair will feel inferior. The warranty is fantastic and the customer service can not be beat. It came fully assembled and ready to be used!

I am a big guy, and I can't sit in this chair for more than 2 hours or it gets painful.

The mesh seat concept does not hold up well when pushed to it's limit, if your a big/heavy person, the mesh is stretched to the point where it is no longer flexible. After about 2 hours my thighs start to hurt and my feet start to go numb.

I agree with another reviewer that a forward tilt is needed to take some pressure off the legs. But if your a heavy person, you need a padded/gel seat, this mesh won't work.

When you get a chair like this it just puts all other to shame, yes it is expensive but like the old saying goes... "You Get What you Pay For"...because I sit at a desk for 8-10 hours a day, I can work longer hours without getting fatigued as easily.

It is worth the money!

I particularly appreciate the adjustability of the chair with the features I opted for. I always thought that I didn't like having a chair tilt back, but with this chair I can control the ease of tilt. I also love the mesh seat, and the fact that the wheels are super quiet even on tile.

The Mirra 2 is perfect. Not as big as the aeron, which is good because my office is not very big. Super comfy, and better than I expected. I'm very happy with the purchase, totally worth it.

A proper, ergonomic chair is one of the best investments you will make. After a series of so-so chairs throughout the years, I decided to invest in the Mirra 2 - best investment ever. The range of options and colors allows you to customize the chair to your specific needs. I particularly like the butterfly suspension back, adjustable lumbar support and the tilt limiter option, which allows me to sit upright while focusing on my graphic design projects, then tilt back when in a more relaxed mode. The Mirra 2 is a great chair with a variety of customization options and I highly recommend it.

After using an original Mirra at work for the last five years I decided to invest in one for home. There is a significant difference between the original and the two and that is the seat mesh suspension height. As an average woman at 5'7 and 135 pounds my heels are about 3.5 from touching the floor in the Mirra 2. Despite this I did choose to keep the chair. This particular seat cut is the only one I've found that doesn't make me sore after 8 hours so I put my desk on 6" risers and got a step stool to put my feet on. HM support recommended two additional options; order the small Aeron which I find uncomfortable or send this one back for a refund and purchase through a local reseller that offers a shorter cylinder which would cost considerably more and take another 6-8 weeks. To figure out if this may be an issue for you measure the height between your heel and back of your knee when sitting square. The Mirra 2 is 16" at the lowest point of the front and back of the seat however at the middle the high point is between 18-19". This high point will sink depending on your weight but as the human body goes your thigh bones do not curve down to meet that 16" at the front. Instead your seat and the middle part act as a ramp to pivot them up. I am right at 16" barefoot, it is reasonable to consider if I wore tall heels I likely would not have noticed a problem. All that said support was very nice and they do stand behind their return policy 100%.

Chair is incredibly comfortable and perfect for studying or long hours in front of the computer. Fully adjustable lumbar and tilt allow user to customize chair to preferred settings. The only critic I would have for the chair would be it was not offered with the ability to perform forward tilt which is helpful when one has to write with pen and paper however in the grand scheme that feels nit-picky and like a truly 1st world problem and luxury.

Everything you could want in a chair. Very comfortable and easy to adjust

My office has the choice of the small Aeron chairs or Mirra (now Mirra 2). I have both a Mirra and a Mirra 2 in my office and love them. I still like the original Mirra slightly better than the Mirra 2 though. It seems to fit me slightly better, but maybe it's just because I'm used to it.

I use this for my home office...the change from a cheaper padded leather chair is phenomenal.

Excellent construction, and many adjustments, but the mesh seat [similar to Aeron chairs] allows my thighs to rest on the hard frame below. And the lumbar support adjustment will not allow it to go down far enough for my back. And there was a faint, unpleasant smell about the chair--which might fade with time.

The chair is very firm and very comfortable for working all day. The next time i buy a Herman Miller i shall find a store that has all the options so that i know which to pay for and which to skip.

The shipping was very careful and the chair was packed beautifully - it arrived as if it had been hand delivered.

Like all HM chairs, Mirra 2 is well-designed. It's sturdy and adjustable, too, but not with enough range for a tall person (6ft+). Even with the seat depth adjustment fully extended, this was not a comfortable chair for me for more than a couple of hours.

Unlike the Arron chair, it's only available in one size.

Fortunately, HM was very understanding and eager to help me find a better fit for me, the Embody.

Comfort aside, the color options are really nice.

I've had this chair for a few weeks now and I love it. I got all of the bells and whistles (sans the special base) and all of the adjustments allow for a really nice fit. It is also very light and easy to roll around. The choice of color options was also great. Herman Miller has been great to deal with as well!

I am a disabled Marine who has severe lower back problems. As such and since I spend an exorbitant amount of time at my desk in front of my HP Envy laptop, I started the search for a chair that would stand up and deliver. I searched for almost a year, looking at every chair-type available (both locally and on the internet). In the end, I decided that MY chair would need the following: 1) Comfort, 2) Options, 3) Reputable name brand, and 4) a great Warranty. I figured to obtain a chair with all of those options, price would need to be taken into consideration. So towards the end of my 1 year search, I came across a local store that carried Herman Miller chairs (best find all year). I quickly realized that the Herman Miller chair would check off all the boxes on MY desired chair! The only question, which one. So initially, I opted for the Aeron Chair. It served me well, but I kept having a specific issue with the seat and the hard plastic type cover that sat directly under the seat. So when my warranty (12 YEARS, YES, 12 YEARS) expired, I figured it was time to try a different Herman Miller chair. I mean lets face it, the warranty alone makes the chair a winner, but when you add in all of the rest, it is just a no brainier. My next Herman Miller chair is the Mira 2 chair. I have had the Mira 2 chair for almost 10 months now and simply love it. The issue I had with my Aeron chair has been eliminated and I have had NO issues at all with my Mira 2 chair. The great thing about the Herman Miller chairs is the options. If you have a limited budget, you can simply choose the chair you want and than select the options that fit your budget. If that is not an issue, than go crazy. For me living on a single retired income, money is an issue, but I wanted my chair to be able to do certain things, so I saved a month and than placed my order. The great thing about the Herman Miller chairs is that you can go online and configure the chair you want and see the price as you go, After you setup the chair with the options you want on line, check out the local stores and see if they can beat the online price, chances are they can, plus you have a local contact, which works great for that warranty service time (this is what I did with my chairs).

So I say all of that to say this; If you buy the Mira 2 chair from Herman Miller, you will NOT be disappointed! Your body will thank you and the chair looks as good as it feels! So make the purchase and don't look back (at least for 12 years, yeah, remember these come with a 12 year warranty)!!! Good Luck and enjoy your chair!

Mirra is pretty good chair, especially good style, that's one of the reason I choose it, but after months experience, I think the best comfortable chair still be Aeron chair that I owned few years ago. Mirra is beautiful and elegant, but just not as perfect comfortable as Aeron, that's the only thing I can picky.

Easy set up. Chair came assembled.

I opted for armless version. The chair is very comfortable and supportive. I have back issues with most chairs, so far none with this chair. Highly recommend this chair.

I work remote needed a good home office chair. I looked at the Aeron's locally but didn't quite fit well on me. So I took the plunge and ordered this. After a long wait time since it was a custom order I've had it for a few weeks now and its been great. Not being tired after a work day is a great feeling.

1. I highly recommend watching the ergonomic Mira2 product video from the web site. Since I could not find a retailer in the Bay Area to test the product, ordering without trying was a concern (+ price factor). Watching the product video I noticed a simple ADD ON: the ability to lower independently the front of the chair - I am only 5-6 and if I seat too far into the chair then my thighs get numb. This was the selling point + the Mesh in the back rest with good support.

2. 10 years ago I purchased the Freedom Chair, great chair at the time, still works but the seat is now too hard on my tail bone and thighs I wanted a mesh design after experiencing it at work-

3. Not having a tall head rest was also a concern but now it is a non-issue for me, I like the way you can control the backrest angle as well as the support/pressure. I wished the height was more adjustable for a taller position when standing more like a drafting chair at times. I picked casters for hard surface and carpet since I do have both at home and it works very well  not many chair designers provide this.

4. The web product configuration is very well done, I was able to add and design the chair the way I wanted to and was delivered as ordered- well packaged, not a scratch and on-time delivery.

I just got my new chair yesterday and I absolutely love it! The only one thing I was disappointed with is that the back does not come up high enough for me to rest my head on it. It only comes up to my shoulders and I'm only 5'5". I work from home, but the office has chairs like this one, only they come up much higher. I have carpal tunnel and the adjustable arms, along with how comfortable the seat and back are, really make my day much more comfortable.

About 10 years ago, I paid good money for a desk chair from a back store. Despite features to make it adjustable, it never was that comfortable to sit in for more than a few minutes. In December while staying at a Hilton Garden Hotel, I noticed when i had sat in their desk chair my whole body relaxed. I looked for a label and model number and found it was a Herman Miller chair. It decide to order one. Unfortunately, that particular model is no longer made, so I chose the Mirra 2 because through the pictures it appeared a lot like the hotel's chair.

While it is a lovely chair, it just does not give me the back support I need, even when utilizing the adjustments. I think the pictures do not give you a really good sense of something that can only be felt to know if it works.