Flo Monitor Arm
- Packaging Type:
- Packaging Dimensions:
- 26.5" x 5" x 3.5"
- Package Weight:
- 6 lbs.
- Assembly Required:
With regular care and maintenance, your Herman Miller product will provide many years of superior performance and satisfaction. To maintain quality, please follow the cleaning procedures outlined here.
The instructions for the care and maintenance of Herman Miller products are provided to you as a service. No warranty is implied since results may vary.
For normal cleaning, wash coated metal surfaces with a soft cloth soaked in detergent and warm water; rinse thoroughly and dry. Remove scuff marks from low-gloss coatings with pre-softened paste wax, following the manufacturer's instructions. Remove scuff marks and scratches from high-gloss coatings using automotive polishing compounds, either liquid or paste. After polishing, apply a pre-softened automotive paste wax to restore original sheen. For assistance in determining the appropriate color and gloss for Herman Miller touch-up paint, contact your Herman Miller Customer Service Representative.
For normal cleaning, wash plastic surfaces with a soft cloth soaked in mild detergent and warm water. Rinse thoroughly and dry with a soft cloth. Do not use solvents or abrasive kitchen cleaners.
|+/- 40 Degree Monitor Tilt
180 Degree Arm Swivel
VESA 100/75 mm bracket
Supports up to 20 pounds with LCD size of 24" or less
With the average male height being 5'10'' At 6 feet tall I am just a bit above average , but I was reading that about 15% of mail are taller then 6''.
Like their chairs their need a taller version for the 6 foot and above crowd.
The only caveat is that it will amplify any movement of the surface it is attached to. In my case I have a wall mounted desktop with a keyboard tray attached (both by Herman Miller), and when I type it shakes the desk a bit. When my monitor was on a stand, this was barely noticeable. However the arm amplifies the vibration so much that my screen is almost too jittery to read. It has me looking for an option to mount it to a wall, (which I have not been able to find yet, unfortunately) so that it's separated from the shaky desk.
EAST TO ASSEMBLE, EASY TO INSTALL, WORKS PERFECTLY !!
HELPS A LOT MY BACK AND DEFINETLY IMPROVES MY NECK PAIN
I FULLY RECOMMEND THIS PRODUCT.
I did have mounting issues, though. My pencil desk is too thick for the side mount. And my grommet hole was too small to fit the original clamp. I bought two 1 inch by 1 and a half inch C-clamps. Tightened them on the original clamps divot holes. They worked great since they fit in the grommet hole and are totally secure.