Designed by Charles and Ray Eames, produced by Herman Miller®
- Packaging Type:
- Packaging Dimensions:
- 22" x 16" x 8"
- Package Weight:
- 6 lbs.
- Assembly Required:
With regular care and maintenance, your Herman Miller product will provide many years of superior performance and satisfaction. To maintain quality, please follow the cleaning procedures outlined here.
The instructions for the care and maintenance of Herman Miller products are provided to you as a service. No warranty is implied since results may vary.
For normal cleaning, wash coated metal surfaces with a soft cloth soaked in detergent and warm water; rinse thoroughly and dry. Remove scuff marks from low-gloss coatings with pre-softened paste wax, following the manufacturer's instructions. Remove scuff marks and scratches from high-gloss coatings using automotive polishing compounds, either liquid or paste. After polishing, apply a pre-softened automotive paste wax to restore original sheen.
Wood & Veneer
This includes Herman Miller products finished with wood veneer or recut wood veneer, except the oiled Eames Lounge Chair and Ottoman with Rosewood, Oiled Walnut, or Oiled Santos Palisander veneer unless specifically noted.
Dust regularly with a slightly damp, soft, lint-free cloth. Wipe dry with a dry, soft cloth in the direction of the wood grain. Spills should be immediately wiped up with a damp cloth.
Once a month
Clean the surface with a soft cloth dampened with a quality cleaner formulated for wood furniture. Wipe the surface in the direction of the wood grain to remove dirt and fingerprints. Wipe dry with a clean, dry cloth.
Twice a year
Apply a good quality furniture polish with a soft cloth. Do not use aerosol-powered cleaners or polishes. Also, do not use polishes containing waxes or abrasives, or polishes that are oil-based.
Herman Miller veneers meet strict testing standards for resistance to wear, light, stains, water, and pressure. To reduce the risk of damage, take some precautions: Use coasters for glasses and mugs. If a glass top is added to the veneer surface, be sure it rests on felt pads. Don’t place a potted plant on a veneer surface unless it’s in a water-tight container or in a drip tray. Don’t let vinyl binders stay on a surface for very long. Use protective pads under equipment with “rubber” cushioning feet. Some chemical compounds used in the feet on office equipment, such as printers and monitor stands, may leave permanent stains or marks.
Minor repair of water rings, stains, and scratches
Rub the surface lightly in the direction of the wood grain using No. 000 steel wool. Apply a scratch-removing polish with a color and value that simulate the veneer. If the scratches are deep, consult a professional furniture refinisher.
Wood is susceptible to bruising and scratching from heavy office equipment, so we encourage a protective surface is placed underneath. Objects should be lifted instead of dragged across a surface. Protective pads should be used under items with a rough bottom, like pottery. Denting, caused by extreme pen pressure when writing, can also damage veneer. Use desk pads or some other protection where a lot of paperwork is done. Sunlight can damage veneer as well, so veneer surfaces should not be in direct sunlight. To help a surface age evenly, users can periodically move items on their desks so that the entire surface is exposed to an even amount of light over time. In addition to light, extremely high or low humidity is a damaging environmental factor. Herman Miller suggests maintaining a relative humidity of 35-65 percent.
1 month ago
2 months ago
4 months ago
4 months ago
4 months ago
6 months ago
9 months ago
1 year ago
1 year ago
I'd love to put this in the bathrooms in my house. Will damp conditions be a problem? How about direct contact with wet towels? How many towels (bath size) could a Hang-It-All accommodate?
If you have any questions, please feel free to contact Herman Miller Customer Care at 888-798-0202.
Please contact the Herman Miller Store if you have any further questions at 888.798.0202 or firstname.lastname@example.org.
What is the width and height of the hang it all, and how far out from the wall does it stick?
If you have any further questions, please contact the Herman Miller Online Store at 888-798-0202 or email@example.com
If you need further assistance, please contact Herman Miller Store at 888.798.0202.
I've had my Eames Hang-It-All for a few years and the paint on the balls is starting to chip and fall off. Any suggestions in further maintaining its integrity?
We recommend cleaning the balls regularly with warm water and soap; rinse thoroughly and dry to help maintain the integrity of the Eames-Hang-It-All. You can find more detailed cleaning instructions on the "Care and Maintenance" tab on the Eames-Hang-It-All product page.
If you need further assistance, please contact Herman Miller Customer Care at 888.798.0202.
Please advice Country of Origin and gross weight for this item.
If you have any other questions, please contact Herman Miller Customer Care at 888.798.0202.
I would love to have the black version with a combination of black, silver and chrome combination. What type of paint should we use?
If you have any further questions, please contact us at 888.798.0202.