Airia Desk

Packaging Type:

Box

Packaging Dimensions:

60" x 9" x 42"

Package Weight:

106 lb

Assembly Required:

Yes

With regular care and maintenance, your Herman Miller product will provide many years of superior performance and satisfaction. To maintain quality, please follow the cleaning procedures outlined here.

The instructions for the care and maintenance of Herman Miller products are provided to you as a service. No warranty is implied since results may vary.

Laminates

Wash the laminate with a soft cloth and a solution of mild detergent and warm water. Rinse thoroughly and dry with a clean soft cloth. For minor repair of burns or other stubborn marks, apply a nonabrasive liquid kitchen cleanser with a soft cloth soaked in warm water. Rub in the direction of the grain; use caution to avoid damaging the surface texture or gloss. If no grain direction is visible, rub with a light, circular motion.

Do not use powdered abrasives or other harsh cleansers like hypochlorite bleach, hydrogen peroxide, nitric or hydrochloric acids, or lye; they may deface the surface and change the finish color.

Wood & Veneer

Dust furniture daily with a slightly damp soft lint-free cloth. Wipe dry with a dry soft cloth in the direction of the wood grain.

Clean the surface with a soft cloth dampened with a quality cleaner formulated for wood furniture. Wipe the surface in the direction of the wood grain to remove dirt and fingerprints. Wipe dry with a clean dry cloth.

Apply a good quality furniture polish with a clean soft cloth.Do not use aerosol-powered cleaners or polishes.Also, do not use polishes containing waxes or abrasives, or polishes that are oil based.

Rub the surface lightly in the direction of the wood grain using No. 000 steel wool. Apply a scratch-removing polish with a color and value that simulates the veneer. If the scratches are deep, consult a professional furniture refinisher.

Coated Metal

Wash coated metal surfaces with a soft cloth soaked in detergent and warm water; rinse thoroughly and dry. Remove scuff marks from low-gloss coatings with pre-softened paste wax, following the instructions on the label. Remove scuff marks and scratches from high-gloss coatings using automotive polishing compounds, either liquid or paste. After polishing, apply a pre-softened automotive paste wax to restore original sheen. 

Do not use abrasive, acid, alcohol–based, or solvent–based cleaners; they may damage the paint finish.

For assistance in determining the appropriate color and gloss for Herman Miller touch-up paint, contact your Herman Miller Customer Care Representative.