Polygon Wire Table, Small

Packaging Type:

Box

Packaging Dimensions:

Top: 12" x 24" x 24" 
Base: 18" x 22" x 22"

Package Weight:

Top: 4 lbs.
Base: 22.5 lbs.

Assembly Required:

Yes

With regular care and maintenance, your Herman Miller product will provide many years of superior performance and satisfaction. To maintain quality, please follow the cleaning procedures outlined here.

The instructions for the care and maintenance of Herman Miller products are provided to you as a service. No warranty is implied since results may vary.

Coated Metal

For normal cleaning, wash coated metal surfaces with a soft cloth soaked in detergent and warm water; rinse thoroughly and dry. Remove scuff marks from low-gloss coatings with pre-softened paste wax, following the manufacturer's instructions. Remove scuff marks and scratches from high-gloss coatings using automotive polishing compounds, either liquid or paste. After polishing, apply a pre-softened automotive paste wax to restore original sheen. Do not use abrasive, acid, alcohol–based, or solvent–based cleaners; they may damage the paint finish. For assistance in determining the appropriate color and gloss for Herman Miller touch-up paint, contact your Herman Miller Customer Service Representative.

Formcoat

For normal cleaning, wash with a soft cloth and a mixture of a mild detergent and warm water; wipe dry with a clean, soft cloth. Avoid the following types of cleaning agents: Lysol cleaners, abrasive cleaners (Soft Scrub, Comet, etc.), and acetone based cleaners. For spot cleaning, spray with Fantastik®, 409®, or Kleerdex Company's Kleer Off General Purpose Cleaner and wipe until dry with a clean, soft cloth. To clean metal marring, use a product call ZUD, which will remove the metal marring without changing the gloss or color of your Formcoat product.