Nelson X-Leg Table
Designed by George Nelson
- Packaging Type:
- Packaging Dimensions:
- 63" x 33" x 4"
- Package Weight:
- 70 lbs.
- Assembly Required:
With regular care and maintenance, your Herman Miller product will provide many years of superior performance and satisfaction. To maintain quality, please follow the cleaning procedures outlined here.
The instructions for the care and maintenance of Herman Miller products are provided to you as a service. No warranty is implied since results may vary.
For normal cleaning, wash the laminate with a soft cloth and a solution of mild detergent and warm water. Rinse thoroughly and dry with a soft cloth. For minor repair of burns or other stubborn marks, apply a nonabrasive liquid kitchen cleanser with a soft cloth soaked in warm water. Rub in the direction of the grain; use caution to avoid damaging the surface texture or gloss. If no grain direction is visible, rub with a light, circular motion. Do not use powdered abrasives or other harsh cleansers like hypochlorite bleach, hydrogen peroxide, nitric or hydrochloric acids, or lye; they may deface the surface and change the finish color.
Wood & Veneer
This includes Herman Miller products finished with wood veneer or recut wood veneer, except the oiled Eames Lounge Chair and Ottoman with Rosewood, Oiled Walnut, or Oiled Santos Palisander veneer unless specifically noted.
Dust regularly with a slightly damp, soft, lint-free cloth. Wipe dry with a dry, soft cloth in the directionof the wood grain.Spills should be immediately wiped up with a damp cloth.
Once a month
Clean the surface with a soft cloth dampened with a quality cleaner formulated for wood furniture. Wipe the surface in the direction of the wood grain to remove dirt and fingerprints. Wipe dry with a clean, dry cloth.
Twice a year
Apply a good quality furniture polish with a soft cloth. Do not use aerosol-powered cleaners or polishes. Also, do not use polishes containing waxes or abrasives, or polishes that are oil based.
Herman Miller veneers meet strict testing standards for resistance to wear, light, stains, water, and pressure. To reduce the risk of damage, take some precautions: Use coasters for glasses and mugs. If a glass top is added to the veneer surface, be sure it rests on felt pads. Don’t place a potted plant on a veneer surface unless it’s in a water-tight container or in a drip tray.Don’t let vinyl binders stay on a surface for very long. Use protective pads under equipment with “rubber” cushioning feet. Some chemical compounds used in the feet on office equipment, such as printers and monitor stands, may leave permanent stains or marks.
Minor repair of water rings, stains, and scratches
Rub the surface lightly in the direction of the wood grain using No. 000 steel wool. Apply a scratch-removing polish with a color and value that simulate the veneer. If the scratches are deep, consult a professional furniture refinisher.
Wood is susceptible to bruising and scratching from heavy office equipment, so we encourage a protective surface is placed underneath. Objects should be lifted instead of dragged across a surface. Protective pads should be used under items with a rough bottom, like pottery. Denting, caused by extreme pen pressure when writing, can also damage veneer. Use desk pads or some other protection where a lot of paperwork is done. Sunlight can damage veneer as well, so veneer surfaces should not be in direct sunlight. To help a surface age evenly, users can periodically move items on their desks so that the entire surface is exposed to an even amount of light over time. In addition to light, extremely high or low humidity is a damaging environmental factor. Herman Miller suggests maintaining a relative humidity of 35-65 percent.
For normal cleaning, wash coated metal surfaces with a soft cloth soaked in detergent and warm water; rinse thoroughly and dry. Remove scuff marks from low-gloss coatings with pre-softened paste wax, following the manufacturer’s instructions. Remove scuff marks and scratches from high-gloss coatings using automotive polishing compounds, either liquid or paste. After polishing, apply a pre-softened automotive paste wax to restore original sheen. For assistance in determining the appropriate color and gloss for Herman Miller touch-up paint, contact your Herman Miller Customer Service Representative.
I wanted to know if you can sit confortably at the table's narrow side? Or the x legs prevent yoy from having enough space? Im thinking of usi g this table with the Eames mo�ded plywood dining chairs with metal legs...
You can put 2 chairs on each side of the tabel and 1 on each end. Here are more detailed dimensions and photos to reference if needed.
Should you run into any challenges, please contact the Herman Miller Store at 888.798.0202 or firstname.lastname@example.org.
Do the tables contain any MDF material?
Please contact the Herman Miller Store if you have any further questions at 888-798-0202 or email@example.com.
If you have any other questions, please reach out to the Herman Miller Online Store at firstname.lastname@example.org or 888.798.0202.
How many people can fit around this table in eames executive chairs?
There are 3 table lengths for the Nelson X-Leg Table. Below provide how many chairs fit around each table length.
60 inches: 60 inches would comfortably fit 2 chairs on each side for a total of 4 chairs. 2 chairs could also go on the end for a maximum of 6 chairs.
72 inches: 72 inches would comfortably fit 3 chairs from the EAG line on each side for a total for 6 chairs. 2 chairs could also go on the ends for a maximum of 8 chairs.
84 inches: 84 inches would fit the same number of chairs as the 72 inch table, but with much more room. There would not be enough space to fit a fourth chair on each side.
If you need further assistance picking out a conference table for your Eames Executive Chairs, please contact Herman Miller Customer Care at 888.798.0202 or email@example.com