Designed by Ward Bennett
Upholstery and Color
Request Free Swatches
- Packaging Type:
- Packaging Dimensions:
- 26.5" x 29" x 36"
- Package Weight:
- 29 lb
- Assembly Required:
Care & Maintenance
With regular care and maintenance, your Herman Miller product will provide many years of superior performance and satisfaction. To maintain quality, please follow the cleaning procedures outlined here.
The instructions for the care and maintenance of Herman Miller products are provided to you as a service. No warranty is implied since results may vary.
Wood & VeneerNormal cleaning
Dust regularly with a slightly damp, soft, lint-free cloth. Wipe dry with a dry, soft cloth in the directionof the wood grain. Spills should be immediately wiped up with a damp cloth.Once a month
Clean the surface with a soft cloth dampened with a quality cleaner formulated for wood furniture. Wipe the surface in the direction of the wood grain to remove dirt and fingerprints. Wipe dry with a clean dry cloth.Twice a year
Apply a good quality furniture polish with a clean soft cloth.Do not use aerosol-powered cleaners or polishes.Also, do not use polishes containing waxes or abrasives, or polishes that are oil based.Stains
To reduce the risk of damage, take some precautions, Use coasters for glasses and mugs.If a glass top is added to the veneer surface, be sure it rests on felt pads. Don’t place a potted plant on a veneer surface unless it’s in a water-tight container or in a drip tray.Don’t let vinyl binders stay on a surface for very long. Use protective pads under equipment with “rubber” cushioning feet. Some chemical compounds used in the feet on office equipment, such as printers and monitor stands, may leave permanent stains or marks.Minor repair of water rings, stains, and scratches
Rub the surface lightly in the direction of the wood grain using No. 000 steel wool. Apply a scratch-removing polish with a color and value that simulates the veneer. If the scratches are deep, consult a professional furniture refinisher.Other Damage
Wood is susceptible to bruising and scratching from heavy office equipment, so we encourage a protective surface is placed underneath. Objects should be lifted instead of dragged across a surface. Protective pads should be used under items with a rough bottom, like pottery.Denting, caused by extreme pen pressure when writing, can also damage veneer.Use desk pads or some other protection where a lot of paperwork is done.
Sunlight can damage veneer as well, so veneer surfaces should not be in direct sunlight. To help a surface age evenly, users can periodically move items on their desks so that the entire surface is exposed to an even amount of light over time.
In addition to light, extremely high or low humidity is a damaging environmental factor. Herman Miller suggests maintaining a relative humidity of 35-65 percent.
Fabric UpholsteryNormal cleaning
Vacuum fabric as needed, using an upholstery attachment. Do not brush fabric or use a vacuum attachment with a rotary brush. Brushing may permanently damage the nap or change the character of the fabric. Do not apply water or any liquid solution. Wetting the fabric with any liquid solution may result in permanent damage. If further cleaning is needed, dry-clean or spot clean fabric with solvent cleaner.Large areas
If large areas are soiled, contact a professional cleaning firm.